There are two popular resources that can be used to protect the resources on any network and they include Pihole and Adguard Home and I can setup either one, but I would only suggest that Pihole has a much larger community so it might be easier to get support if is ever needed. If you want to get more informtion on the following URL discusses some of the differences between the two https://www.smarthomebeginner.com/pi-hole-vs-adguard-home/ Each box is setup to order and the box that I use may not always be the same unit, but they all will have at least 1Gb of memory and 8Gb of storage. The box will also be setup so that it should be mostly plug and play. All that should be required is to connect it to the network via Ethernet and then power it on. The box should then be accessible from a webpage so if you want to monitor it or make changes to the setup. All I will need to know is what you network address is so I can setup the box to communicate on your network without making all kinds of changes to the setup when you should have to. A small, but very powerful little box can protect every computer in your home of office by simply utilizing this device. These boxes have about the same processing power as a Raspberry Pi 4 or similar devices, but the are self contained and don’t require any extra components like heatsinks, cases or micro SD cards to make a working unit. The box is just repurposed for us a network protection device and doesn’t require any external media like a microsd card or flash drive to boot from as it has internal emmc storage that is utilized instead and it performs much better from emmc. Network-wide ad blocking via your own Linux hardware The Pi-hole® is a DNS sinkhole that protects your devices from unwanted content without installing any client-side software. Resolute: content is blocked in non-browser locations, such as ad-laden mobile apps and smart TVsResponsive: seamlessly speeds up the feel of everyday browsing by caching DNS queriesLightweight: runs smoothly with minimal hardware and software requirementsRobust: a command-line interface that is quality assured for interoperabilityInsightful: a beautiful responsive Web Interface dashboard to view and control your Pi-holeVersatile: can optionally function as a DHCP server, ensuring all your devices are protected automaticallyScalable: capable of handling hundreds of millions of queries when installed on server-grade hardwareModern: blocks ads over both IPv4 and IPv6Free: open source software that helps ensure you are the sole person in control of your privacy

There are two popular resources that can be used to protect the resources on any network and they include Pihole and Adguard Home and I can setup either one, but I would only suggest that Pihole has a much larger community so it might be easier to get support if is ever needed. If you want to get more informtion on the following URL discusses some of the differences between the two https://www.smarthomebeginner.com/pi-hole-vs-adguard-home/ Each box is setup to order and the box that I use may not always be the same unit, but they all will have at least 1GB of memory and 8GBs of storage. The box will also be setup so that it should be mostly plug and play. All that should be required is to connect it to the network via Ethernet and then power it on. The box should then be accessible from a webpage so if you want to monitor it or make changes to the setup. All I will need to know is what you network address is so I can setup the box to communicate on your network without making all kinds of changes to the setup when you should have to. A small, but very powerful little box can protect every computer in your home of office by simply utilizing this device. These boxes have about the same processing power as a Raspberry Pi 4 or similar devices, but the are self contained and don’t require any extra components like heatsinks, cases or micro SD cards to make a working unit. The box is just repurposed for us a network protection device and doesn’t require any external media like a microsd card or flash drive to boot from as it has internal emmc storage that is utilized instead and it performs much better from EMMC. Network-wide ad blocking via your own Linux hardware The Pi-hole® is a DNS sinkhole that protects your devices from unwanted content without installing any client-side software. Resolute: content is blocked in non-browser locations, such as ad-laden mobile apps and smart TVsResponsive: seamlessly speeds up the feel of everyday browsing by caching DNS queriesLightweight: runs smoothly with minimal hardware and software requirementsRobust: a command-line interface that is quality assured for interoperabilityInsightful: a beautiful responsive Web Interface dashboard to view and control your Pi-holeVersatile: can optionally function as a DHCP server, ensuring all your devices are protected automaticallyScalable: capable of handling hundreds of millions of queries when installed on server-grade hardwareModern: blocks ads over both IPv4 and IPv6Free: open source software that helps ensure you are the sole person in control of your privacy