Abbot Technologies

UNLIMITED DATA AT&T PLAN HOTSPOT – $79.99 / MONTH! FREE MIFI

AT&T UNLIMITED DATA PLAN Jetpack free – First month is includedONLY 5 Lines Left – BUY BEFORE it’s GONE You Are Purchasing This AT&T Home/Business Mifi 4G LTE + OUR EXCLUSIVE FREE LIFETIME WARRANTY Included with FREE return shipping if broken. NO SELLER will offer this Lifetime Warranty GREAT for On the Go Internet, Rv’s Truckers, Homework, Home, Everyone. THERE IS NO DATA CAP BEWARE of Other Sellers Selling Lower Priced fake Plans that are not True Unlimited. This line is on BUSINESS ENTERPRISE Unlimited plans Our Plan here Can go OVER 1,000 GB of data per month, Other sellers can’t make this claim. Other Sellers rates if it’s lower than $80 month, you can’t go over 200GB month or other sellers line will disconnect you You are Buying the Home/Travel Mifi that has our RARE AT&T Unlimited 4G LTE ENTERPRISE PLAN, Sim Card, in it. In this line, you will have a higher 4G network priority and DO NOT get slowed down after 22 GB of usage. 100% Pure Unlimited. No Throttle. No Caps, Use as much as you want! AT&T NO LONGER OFFERS MOBILE Routers With UNLIMITED DATA. ATT is raising their Rates but this line stays at the same rate No Contract, No Credit Check. Use it on your Smartphone/TV/Tablet/Laptop/Computer/Gaming console… etc. Auction Includes: 1. AT&T 4G LTE Home/Business MiFi 2. 100% Unlimited AT&T 4G LTE Data on Enterprise Plan Sim Card 3. Charger 4. FREE Expedited Shipping 5. LIFETIME FREE Warranty Included Monthly Renewal: 1. Monthly $79.99 Renewal instructions will be included for you to renew your Home/Travel Router. 2. You Will Receive Recurring Paypal Invoice to Renew Your Service. 3. Billing Cycle is Every 30 Days and you can keep the Hotspot LIFETIME WARRANTY Included: – If your Router or Charger Ever Fails Contact US or Customer Service # and WE REPLACE FREE of charge – + FREE return shipping of defective device. This Home/Business Travel Router is SIM CARD LOCKED: meaning you can’t move our sim card into another hotspot/Router Device. our sim card will NOT work on another device of your choice. If you want to change the device, you have to get one from our company. Our Router Has 4G LTE Bands Below: B2/B4/B5/B12/B13/B14/B66/B71 Please feel free to contact us with any questions! BUY TODAY Before it’s gone. No refunds if you buy this by mistake. Once you purchase, your Order gets Shipped the Same day Created with Eselt – Mobile Optimized Listing Designs for eBay Sellers Created with Eselt – Mobile Optimized Listing Designs for eBay Sellers Links Our Store Seller Profile Feedback Save this seller Contact Newsletter Don’t miss any offers! We will inform you about our offers and promotions by email. Subscribe to newsletter Contact Give us a call Send us a message

Read more

T-Mobile Franklin Wireless JEXtream RG2100 5G Portable Wi-Fi Hotspot Used

Locked to T-Mobile. Comes with hotspot, bottom cover, and battery only. Tested and guaranteed to work on T-Mobile. Unit has scratches from use. The JEXtream RG2100 5G Portable Wi-Fi Hotspot by T-Mobile is a compact and powerful device that provides fast and reliable internet connectivity on the go. The 5G technology ensures high-speed internet access, making it ideal for streaming, browsing, and downloading content wherever you are. Stay connected and productive with the JEXtream RG2100 5G Portable Wi-Fi Hotspot.

Read more

〔BUY 10 PAY 6〕ELEGOO PETG Matte PLA PLA+ SILK ABS 1.1KG 1.75mm 3D Filament TPU

Combined with its superior chemical and abrasion resistance, Elegoo TPU is the ideal choice for all your outdoor gear and projects. Unlock Limitless Color Creativity: With a rich palette of vibrant colors, Elegoo PLA Basic lets your creativity run wild, ensuring every project shines with the perfect shade that flawlessly matches your vision—ideal for multi-part and detailed artistic creations.

Read more

【Buy 6 Get 4 Free,Add 10】ELEGOO PLA Rapid PLA+ PETG TPU 3D Printer Filament 1KG

ELEGOO PLA Filament 1.75mm 3D Printer Filament Dimensional Accuracy +/- 0.02mm, Compatible with Most FDM Printer 【High-Quality PLA Filaments】Made of high-quality PLA, a commonly used thermoplastic material features lower melting temperature and ease of use, low warp and shrinkage, odorless during printing, and provides a glossy surface finish. 【Clog-Free & Bubble-Free】Designed and manufactured with clog-free, superb layer bonding and great fluidity for smooth and stable extrusion. Complete dried for 24 hours before packaging and vacuum sealed with desiccants in the bag to protect the filament from moisture, no clogging and bubbling problems. 【Dimensional Accuracy & Consistency】 Strict tolerances guarantee these PLA filaments of 1.75 mm diameter much smoother and more stable printing with the dimensional accuracy of +/- 0.02 mm; 1 kg spool (2.2lbs). 【Less-tangle and Easy to Use】Full mechanical winding and strict manual examination to ensure that the line is neatly arranged and less tangled, and to avoid possible snap and line breaking. A larger spool inner diameter design for easy feeding. 【Wide Compatibility】Universal compatibility with most of the common 1.75mm FDM 3D printers on the market due to the high-quality standards in terms of manufacturing accuracy and a small dimensional tolerance of +/- 0.02mm. Technical Specifications Density: 1.20g/Cm³ Melt Index: 14(190°C/2.16kg)G/10min Tensile Strength（X-Y): ≥ 50mpa Elongation At Break（X-Y): 11.2% Bending Strength:91mpa Bending Modulus:1913mpa Charpy Impact Strength:5.4kj/M² Thermal Deformation Temp: 53°C(0.45mpa) Fan: 100% Line Length: (1.75mm) 330-335m Rockwell Hardness: 88 Print Layer Thickness: 0.2mm Recommended Extrusion/Nozzle Temp: 190~220°C(Recommended 205°C) Recommended Heated Bed Temp: 50-65°C Printing Speed: 30-70mm/S Recommendation Platform: PEI/Glass/Fiberglass Board+Pvp Glue Stick Or Textured Paper PLA+ FILAMENT Specially Design for 3D Printing Technical Specifications Density: 1.25g/Cm³ Melt Index: 10(190°C/2.16kg)g/10min Tensile Strength（X-Y): ≥ 60mpa Elongation At Break（X-Y): 23% Bending Strength:80mpa Bending Modulus:1911mpa Charpy Impact Strength:9j/M² Thermal Deformation Temp: 53°C(0.45mpa) Fan: 100% Line Length: (1.75mm) 330-335m Rockwell Hardness: 88 Print Layer Thickness: 0.2mm Recommended Extrusion/Nozzle Temp: 200~230°C(Recommended 215°C) Recommended Heated Bed Temp: 50-65°C Printing Speed: 30-70mm/S Recommendation Platform: PEI/Glass/Fiberglass Board+Pvp Glue Stick Or Textured Paper PAPID PLA+ FILAMENT Specially Design for High Speed 3D Printing 【Less-tangle & Neatly Wound】Full mechanical winding and strict manual inspection ensures that all high-speed pla plus filaments are neatly wound, which effectively reduces tangles, snap and line breakage issues 【30-600mm/s Printing Speed】With enhanced fluidity, ELEGOO Official Store UK RAPID PLA+ filament melts rapidly and flows smoothly, allowing for up to 600mm/s fast printing speed. You can complete the projects quickly without compromising on quality 【Enhanced Strength & Toughness】ELEGOO Official Store UK RAPID PLA plus filament features high flexural modulus and elongation at break, which makes it resistant to brittleness and cracking, bringing excellent results for printing functional parts 【Top-Notch Accuracy & Consistent】Precise production process guarantee the filament of 1.75mm diameter, accuracy of +/- 0.02mm. Strict tolerances and perfect dimensional accuracy ensure smooth and consistent feeding for filaments 【For Most 3D Printers】Rapid PLA+ filament fit for both regular printers and high speed printers, perfectly for most high speed printer such as Neptune 4, Neptune 4 pro, K1, K1 Max, Ender 5 series, Kobra 2, M5, M5C and more Technical Specifications Density: 1.20g/Cm³ Melt Index: 8.2(190°C/2.16kg)g/10min Tensile Strength（X-Y): ≥ 60mpa Elongation At Break（X-Y): 19% Bending Strength:80mpa Bending Modulus:2680mpa Charpy Impact Strength:3.85kj/M² Thermal Deformation Temp: 53°C(0.45mpa) Fan: 100% Line Length: (1.75mm) 330-335m Rockwell Hardness: 88 Print Layer Thickness: 0.2mm Recommended Extrusion/Nozzle Temp: 200~230°C(Recommended 205°C) Recommended Heated Bed Temp: 40-60°C Printing Speed: 30-600mm/S Recommendation Platform: PEI/Glass/Fiberglass Board+Pvp Glue Stick Or Textured Paper PAPID PLA+ FILAMENT Specially Design for High Speed 3D Printing 【Less-tangle & Neatly Wound】Full mechanical winding and strict manual inspection ensures that all high-speed pla plus filaments are neatly wound, which effectively reduces tangles, snap and line breakage issues 【30-600mm/s Printing Speed】With enhanced fluidity, ELEGOO Official Store UK RAPID PLA+ filament melts rapidly and flows smoothly, allowing for up to 600mm/s fast printing speed. You can complete the projects quickly without compromising on quality 【Enhanced Strength & Toughness】ELEGOO Official Store UK RAPID PLA plus filament features high flexural modulus and elongation at break, which makes it resistant to brittleness and cracking, bringing excellent results for printing functional parts 【Top-Notch Accuracy & Consistent】Precise production process guarantee the filament of 1.75mm diameter, accuracy of +/- 0.02mm. Strict tolerances and perfect dimensional accuracy ensure smooth and consistent feeding for filaments 【For Most 3D Printers】Rapid PLA+ filament fit for both regular printers and high speed printers, perfectly for most high speed printer such as Neptune 4, Neptune 4 pro, K1, K1 Max, Ender 5 series, Kobra 2, M5, M5C and more Technical Specifications Density: 1.20g/Cm³ Melt Index: 8.2(190°C/2.16kg)g/10min Tensile Strength（X-Y): ≥ 60mpa Elongation At Break（X-Y): 19% Bending Strength:80mpa Bending Modulus:2680mpa Charpy Impact Strength:3.85kj/M² Thermal Deformation Temp: 53°C(0.45mpa) Fan: 100% Line Length: (1.75mm) 330-335m Rockwell Hardness: 88 Print Layer Thickness: 0.2mm Recommended Extrusion/Nozzle Temp: 200~230°C(Recommended 205°C) Recommended Heated Bed Temp: 40-60°C Printing Speed: 30-600mm/S Recommendation Platform: PEI/Glass/Fiberglass Board+Pvp Glue Stick Or Textured Paper Technical Specifications Density: 1.31g/Cm³ Melt Index: 5-8(190°C/2.16kg)g/10min Tensile Strength（X-Y): ≥ 42mpa Elongation At Break（X-Y): 23% Bending Strength:80mpa Bending Modulus:2825mpa Charpy Impact Strength:5.9j/M² Thermal Deformation Temp: 58°C(0.45mpa) Fan: 100% Line Length: (1.75mm) 330-335m Rockwell Hardness: 88 Print Layer Thickness: 0.2mm Recommended Extrusion/Nozzle Temp: 200~230°C(Recommended 215°C) Recommended Heated Bed Temp: 50-65°C Printing Speed: 30-70mm/S Recommendation Platform: PEI/Glass/Fiberglass Board+Pvp Glue Stick Or Textured Paper

Read more